Editing Circuits

The Edit Circuiting tool modifies existing circuit information. Use this tool to reassign circuit numbers and update the information attached to the circuited elements.

 

To edit existing circuits or a circuited item:

1.	Click the Edit Circuiting tool from the MEP tool set.

2.	Click on the circuited item to be edited.

The Edit Circuit Tool dialog box opens.

 

Parameter	Description
List of editing operations	Selects the editing operation to perform. Select Edit circuit information only to edit the information which applies to the entire circuit. Select Edit selected item only or Edit all items on the circuit to enter edits which apply only to the selected circuiting item or edit both circuit and circuited object information. Select Delete selected item only or Delete entire circuit to delete the circuited item from the circuit or delete the entire circuit (the circuited items remain on the drawing).
Circuit to Edit	Selects the specific circuit to edit; available if selected item has multiple circuit assignments associated with it
Circuit Information	Enter the circuit information (used on the panel schedule)
Panel Name	Select the associated panel
Circuit #	Enter the circuit number
Trip	Enter the trip rating
Wire Size	Enter the size of the wire
Conduit Size	Enter the conduit size
V.A./Watts	Enter the total V.A./Watts rating
Remarks	Enter remarks about the circuit
Check Voltage and Phase of Circuit Items	Select to verify that the voltage and phase of circuit items is correct
Item Data	Enter parameters for the object being circuited
Phase/Pole	Enter the number of phases/poles
Voltage	Enter the voltage
V.A./Watts	Enter the V.A./Watts for this object
Remarks	Enter remarks for the object

3.	Select the operation to perform.

If there are multiple records attached to this item, select the record to edit from the Circuit To Edit list. The record information displays in the Circuit Tool dialog box.

4.

Click OK.